Flat pot magnets of hard ferrite

Flat pot magnets of hard ferrite, with screwed bush, galvanized

Alternative to the standard we also offer individual solutions:
» Corrosion protection with black galvanised housing surfaces (up to 720 hours in a salt spray test - depending on the magnet material)
Article number D mm d mm H mm L mm Thread M Force* N Weight g Temperature °C  
F10A-vM3 10+0.1/-0.1 6+0.1/-0.1 4.5+0.2/-0.1 11.5+0.3/-0.2 M3 4 3 200
F13A-vM3 13+0.1/-0.1 6+0.1/-0.1 4.5+0.2/-0.1 11.5+0.3/-0.2 M3 10 4 200
F16A-vM3 16+0.1/-0.1 6+0.1/-0.1 4.5+0.2/-0.1 11.5+0.3/-0.2 M3 18 6 200
F20A-vM3 20+0.1/-0.1 6+0.1/-0.1 6+0.2/-0.1 13+0.3/-0.2 M3 30 11 200
F25A-vM4 25+0.1/-0.1 8+0.2/-0.2 7+0.3/-0.2 15+0.5/-0.3 M4 40 20 200
F32A-vM4 32+0.1/-0.1 8+0.2/-0.2 7+0.3/-0.2 15+0.5/-0.3 M4 80 31 200
F36A-vM4 36+0.2/-0.1 8+0.2/-0.2 7.7+0.3/-0.2 16+0.5/-0.3 M4 100 42 200
F40A-vM4 40+0.2/-0.1 8+0.2/-0.2 8+0.3/-0.2 16.5+0.5/-0.3 M4 125 57 200
F40A-vM5 40+0.2/-0.1 10+0.2/-0.2 8+0.3/-0.2 18+0.5/-0.3 M5 125 59 200
F47A-vM4 47+0.2/-0.1 8+0.2/-0.2 9+0.4/-0.2 17+0.6/-0.3 M4 180 86 200
F47A-vM6 47+0.2/-0.1 12+0.2/-0.2 9+0.4/-0.2 20.5+0.6/-0.3 M6 180 91 200
F50A-vM4 50+0.2/-0.1 8+0.2/-0.2 10+0.4/-0.2 18.5+0.6/-0.3 M4 220 105 200
F50A-vM6 50+0.2/-0.1 12+0.2/-0.2 10+0.4/-0.2 22+0.6/-0.3 M6 220 111 200
F57A-vM4 57+0.2/-0.1 8+0.2/-0.2 10.5+0.5/-0.2 18.5+0.7/-0.3 M4 280 147 200
F57A-vM6 57+0.2/-0.1 12+0.2/-0.2 10.5+0.5/-0.2 22.5+0.7/-0.3 M6 280 153 200
F63A-vM4 63+0.3/-0.1 8+0.2/-0.2 14+0.5/-0.2 22+0.7/-0.3 M4 350 228 200
F63A-vM8 63+0.3/-0.1 15+0.2/-0.2 14+0.5/-0.2 30+0.7/-0.3 M8 350 245 200
F80A-vM6 80+0.3/-0.1 12+0.2/-0.2 18+0.5/-0.2 28.5+0.7/-0.3 M6 600 477 200
FG080HFA-06v-00 ¹ 80+0.3/-0.1 12+0.2/-0.2 10+0.5/-0.2 21.5+0.7/-0.3 M6 600 273 200
F80A-vM10 80+0.3/-0.1 20+0.2/-0.2 18+0.5/-0.2 34+0.7/-0.3 M10 600 499 200
F100A-vM12 100+0.5/-0.1 22+0.2/-0.2 22+0.5/-0.2 43+0.7/-0.3 M12 900 956 200
F125A-vM14 125+0.5/-0.1 25+0.2/-0.2 26+0.5/-0.2 50+0.7/-0.3 M14 1300 1720 200
REACH
RoHS
UV_resistance
PAC free
¹ Housing punched from strip steel, rear chamfer with radius
* The forces have been determined at room temperature on a plate in polished steel (S235JR according to DIN 10 025) with a thickness of 10 mm (1kg ~ 10N). A maximum deviation of -10% compared to the specified value is possible in exceptional cases. Value is exceeded in general. Small cracks in the magnetic material do not influence the force. Depending on the type of application (installation situation, temperatures, counter anchor etc.) the forces can be influenced enormously. The indicated values are serving as an orientation. Please get advice and help from our experts.