Flat pot magnets of NdFeB, steel body, with external thread, galvanized
Flat pot magnets of Neodymium-iron-boron (NdFeB)
Flat pot magnets of NdFeB, steel body, with external thread, galvanized
PRODUCT INFORMATION: The above mentioned flat pot magnets are manufactured from standard parts according to DIN EN ISO 4017-8.8. Dimensions and tolerances depend on the current status of the standard. Hexagon screws are suitable for being tightened with an open-end spanner. This is a special advantage in comparison to our round flat pot magnets, which only can be screwed on by hand. The hexagon screws are available with different lengths corresponding to fixed standards. By this simplified production method they are quite economical resp. there is a cost benefit compared with the turned special parts.
Article number
SW mm
h mm
Thread MxL
Force* N
Weight g
Temperature °C
FG010NdAG06v-00
10
4+0/-0.5
M6x12
25
6
80
FG010NdAG06v-01
10
4+0/-0.5
M6x16
25
6
80
FG010NdAG06v-02
10
4+0/-0.5
M6x20
25
7
80
FG010NdAG06v-03
10
4+0/-0.5
M6x25
25
8
80
FG010NdAG06v-04
10
4+0/-0.5
M6x30
25
10
80
FG013NdAG08v-00
13
5.3+0/-0.5
M8x16
50
11
80
FG013NdAG08v-01
13
5.3+0/-0.5
M8x20
50
12
80
FG013NdAG08v-02
13
5.3+0/-0.5
M8x25
50
15
80
FG013NdAG08v-03
13
5.3+0/-0.5
M8x30
50
17
80
FG013NdAG08v-04
13
5.3+0/-0.5
M8x40
50
21
80
FG017NdAG10v-00
17
6.4+0/-0.5
M10x20
75
24
80
FG017NdAG10v-01
17
6.4+0/-0.5
M10x25
75
27
80
FG017NdAG10v-02
17
6.4+0/-0.5
M10x30
75
31
80
FG017NdAG10v-03
17
6.4+0/-0.5
M10x40
75
37
80
FG017NdAG10v-04
17
6.4+0/-0.5
M10x50
75
43
80
FG019NdAG12v-00
19
7.5+0/-1
M12x25
110
40
80
FG019NdAG12v-01
19
7.5+0/-1
M12x30
110
45
80
FG019NdAG12v-02
19
7.5+0/-1
M12x40
110
54
80
FG019NdAG12v-03
19
7.5+0/-1
M12x50
110
62
80
FG019NdAG12v-04
19
7.5+0/-1
M12x60
110
71
80
FG024NdAG16v-00
24
10+0/-1
M16x30
145
86
80
FG024NdAG16v-01
24
10+0/-1
M16x40
145
100
80
FG024NdAG16v-02
24
10+0/-1
M16x50
145
117
80
FG024NdAG16v-03
24
10+0/-1
M16x60
145
133
80
FG024NdAG16v-04
24
10+0/-1
M16x80
145
165
80
* The forces have been determined at room temperature on a plate in polished steel (S235JR according to DIN 10 025) with a thickness of 10 mm (1kg ~ 10N). A maximum deviation of -10% compared to the specified value is possible in exceptional cases. Value is exceeded in general. Depending on the type of application (installation situation, temperatures, counter anchor etc.) the forces can be influenced enormously. The indicated values are serving as an orientation. Please get advice and help from our experts.
