Raw magnets of Samarium-Cobalt (SmCo)

Ring magnet of SmCo

PRODUCT INFORMATION:
SmCo magnets can be produced in almost every size and without tool costs. Even very small quantities are possible. The surface is blank. The specified temperature refers to the maximum operating temperature of the material. The resistance may be reduced due to the geometry.

As an alternative to our standard product we offer:
» customised dimensions
» modified directions of magnetisation
» other types of magnetisation
» further qualities
» additional coating (e.g. zinc-plated, nickel-plated, epoxy-coated)
 

Data sheet
Article numberQualityD mmd mmH mmAdhesive force* NWeight gTemperature °CMagnetisation
MS2ARm15x8x3.5RCS26H15 +0.1/-0.18 +0.1/-0.13,5 +0.1/-0.1233.7350axial
Article number: MS2ARm15x8x3.5
Quality: RCS26H
D mm: 15 +0.1/-0.1
d mm: 8 +0.1/-0.1
H mm: 3,5 +0.1/-0.1
Adhesive force* N: 23
Weight g: 3.7
Temperature °C: 350
Magnetisation: axial
MS2ARm18x8x4RCS26H18 +0.1/-0.18 +0.1/-0.14 +0.1/-0.1316.7350axial
Article number: MS2ARm18x8x4
Quality: RCS26H
D mm: 18 +0.1/-0.1
d mm: 8 +0.1/-0.1
H mm: 4 +0.1/-0.1
Adhesive force* N: 31
Weight g: 6.7
Temperature °C: 350
Magnetisation: axial
MS2ARm24x11x4RCS26H24 +0.1/-0.111 +0.1/-0.14 +0.1/-0.15112350axial
Article number: MS2ARm24x11x4
Quality: RCS26H
D mm: 24 +0.1/-0.1
d mm: 11 +0.1/-0.1
H mm: 4 +0.1/-0.1
Adhesive force* N: 51
Weight g: 12
Temperature °C: 350
Magnetisation: axial
RM032SCRi99rh00RCS26H32 +0.1/-0.110,5 +0.1/-0.14 +0.1/-0.17724350axial
Article number: RM032SCRi99rh00
Quality: RCS26H
D mm: 32 +0.1/-0.1
d mm: 10,5 +0.1/-0.1
H mm: 4 +0.1/-0.1
Adhesive force* N: 77
Weight g: 24
Temperature °C: 350
Magnetisation: axial
Magnetized via the height (H)
* The forces have been determined at room temperature on a polished plate made of steel (S235JR according to DIN 10 025) with a thickness of 10 mm (1kg~10N). A deviation of up to -10% from the specified value is possible in exceptional cases. In general, the value is exceeded. The type of application (installation situation, temperatures, counter anchors, etc.) sometimes influence the forces enormously. The values given are for orientation purposes. Let our experts advise you.