Raw magnets of Neodymium-iron-boron (NdFeB)

Ring magnet made of NdFeB, with countersink, up to max. 150°C

technical drawing Ring magnet with countersink | © Brugger GmbH
Ring magnet made of NdFeB, up to max. 150°C | © Brugger GmbH
technical drawing Ring magnet with countersink | © Brugger GmbH
Ring magnet made of NdFeB, up to max. 150°C | © Brugger GmbH
technical drawing Ring magnet with countersink | © Brugger GmbH

PRODUCT NOTE:
NdFeB magnets can be produced in almost any desired dimensions and without tooling costs. Small quantities are therefore also possible. They are nickel-copper-nickel (NiCuNi) coated to protect against corrosion. The specified temperature refers to the maximum operating temperature of the material. Due to the geometry, the
resistance may be reduced.

As an alternative to the standard, we also offer customised solutions:
" customer-specific dimensions
" modified magnetisation direction
" other types of magnetisation
" other qualities up to N54
" increased operating temperature up to 220°C
" self-adhesive on one side with additional foil
" customer-specific shapes (e.g. cubes, cones, etc.).e.g. cube, cone, sphere, segments)
" other coatings (e.g. galvanised, gold-plated, epoxy-coated)

Data sheet
Product variants
Article numberQualityD mmd mmH mmAdhesive force* NWeight gTemperature °CMagnetisation
RM010NdRi99ng28N45SH10 +0.1/-0.13,4 +0.1/-0.15 +0.1/-0.1262.5150axial
RM012NdRi99ng32N45SH12 +0.1/-0.13,5 +0.1/-0.13 +0.1/-0.1252.2150axial
RM015NdRi99ng34N45SH15 +0.1/-0.14,5 +0.1/-0.13,5 +0.1/-0.1393.8150axial
RM018NdRi99ng15N45SH18 +0.1/-0.14,5 +0.1/-0.14 +0.1/-0.1536.9150axial
RM018NdRi99ng16N45SH18 +0.1/-0.15,5 +0.1/-0.14,5 +0.1/-0.1597150axial
RM020NdRi99ng36N35H20 +0.1/-0.16,4 +0.1/-0.15 +0.1/-0.1529.3120axial
RM024NdRi99ng12N45SH24 +0.1/-0.15,5 +0.1/-0.14 +0.1/-0.17512150axial
Magnetised by the height (H)
* The forces have been determined at room temperature on a polished plate made of steel (S235JR according to DIN 10 025) with a thickness of 10 mm (1kg~10N). A deviation of up to -10% from the specified value is possible in exceptional cases. In general, the value is exceeded. The type of application (installation situation, temperatures, counter anchors, etc.) sometimes influence the forces enormously. The values given are for orientation purposes. Let our experts advise you.