Shopping list
Driving directions

Rubber coated systems

Magnet assembly of NdFeB, plastic coat, rubberized holding surface

These systems can only be fastened by adhering (glue or double-sided tape). Adequate adhesive is available from specialised trade.

The following materials can be found at the rear:
A18B-Ks: Polyamide (PA)
A22B-Ks: Polyamide (PA)
A31B-Ks: Galvanised steel
AS031NdB-00s-03: Polyamide (PA)
A43B-Ks: Polyamide (PA)
Article number D mm H mm Force* N Shear force* N Weight g Temperature °C  
A18B-Ks 18 6 37 11 6.5 60
A22B-Ks 22 6 58 18 9.5 60
A31B-Ks ¹ 31 6 89 25 25 60
AS031NdB-00s-03 31 6 89 35 22 60
A43B-Ks 43 6 100 38 28 60
PAC free
¹ Due to production reasons a cylinder bore is on the holding surface
* The forces have been determined at room temperature on a plate in polished steel (S235JR according to DIN 10 025) with a thickness of 10 mm (1kg ~ 10N). A maximum deviation of -10% compared to the specified value is possible in exceptional cases. Value is exceeded in general. Depending on the type of application (installation situation, temperatures, counter anchor etc.) the forces can be influenced enormously. The indicated values are serving as an orientation. Please get advice and help from our experts.