Contact
Shopping list
Driving directions

Bar magnets of Samarium-Cobalt (SmCo)

Bar magnet of SmCo, brass body, with fitting tolerance h6

PRODUCT INFORMATION:
Direct mounting of the bar magnet in iron reduced the holding power by up to 15% due to magnetic short circuiting. To avoid this, certain distances need to be maintained between the brass casing of the bar magnet and the iron. The distances are also to be adhered to if the bar magnet was shortened by dimension A. Please refer to the above column for recommended distances (distance mm).

The holding surface is ground and therefore not galvanised.

Alternative to the standard we also offer individual solutions:
» Stainless steel housing
» Housing completely galvanised to better corrosion protection
» Higher temperature until 280 °C
» Stainless steel pole shoes
Article number D mm H mm A¹ mm Distance mm Force* N Weight g Temperature °C  
SG-6-SC/h6 6 (h6) 20+0.2/-0.2 10 1.5 8 4.5 200
SG-8-SC/h6 8 (h6) 20+0.2/-0.2 10 1.5 22 8 200
SG-10-SC/h6 10 (h6) 20+0.2/-0.2 8 2.0 40 12 200
SG-13-SC/h6 13 (h6) 20+0.2/-0.2 6 2.5 60 20 200
SG-16-SC/h6 16 (h6) 20+0.2/-0.2 2 3.0 125 30 200
SG-20-SC/h6 20 (h6) 25+0.2/-0.2 5 4.0 250 60 200
SG-25-SC/h6 25 (h6) 35+0.3/-0.3 7 5.0 400 134 200
SG-32-SC/h6 32 (h6) 40+0.3/-0.3 4.5 6.0 600 251 200
REACH
RoHS
UV_resistance
PAC free
¹ max. length by which the bar magnet can be shortened or machined without being damaged.
* The forces have been determined at room temperature on a plate in polished steel (S235JR according to DIN 10 025) with a thickness of 10 mm (1kg ~ 10N). A maximum deviation of -10% compared to the specified value is possible in exceptional cases. Value is exceeded in general. Small cracks in the magnetic material do not influence the force. Depending on the type of application (installation situation, temperatures, counter anchor etc.) the forces can be influenced enormously. The indicated values are serving as an orientation. Please get advice and help from our experts.