Flat pot magnets of SmCo, steel body, with bore and counter bore, galvanized, until 280°C
Alternative to the standard we also offer individual solutions: » Corrosion protection with black galvanised housing surfaces (up to 720 hours in a salt spray test - depending on the magnet material)
Flachgreifer ø16mm aus SmCo, mit Bohrung und Senkung, verzinkt, bis 280°C
Article number:
F16-SCCvT
D mm:
16 +0.1/-0.1
d mm:
3,5 +0.1/-0.1
d1 mm:
6,6 +1/0
H mm:
4,5 +0.1/-0.1
Adhesive force* N:
57
Weight g:
6
Temperature °C:
280
F20-SCCvT
20 +0.1/-0.1
4,5 +0.1/-0.1
9,3 +1/0
6 +0.1/-0.1
81
13
280
Flachgreifer ø20mm aus SmCo, mit Bohrung und Senkung, verzinkt, bis 280°C
Article number:
F20-SCCvT
D mm:
20 +0.1/-0.1
d mm:
4,5 +0.1/-0.1
d1 mm:
9,3 +1/0
H mm:
6 +0.1/-0.1
Adhesive force* N:
81
Weight g:
13
Temperature °C:
280
F25-SCCvT
25 +0.1/-0.1
4,5 +0.1/-0.1
9,2 +1/0
7 +0.1/-0.1
105
25
280
Flachgreifer ø25mm aus SmCo, mit Bohrung und Senkung, verzinkt, bis 280°C
Article number:
F25-SCCvT
D mm:
25 +0.1/-0.1
d mm:
4,5 +0.1/-0.1
d1 mm:
9,2 +1/0
H mm:
7 +0.1/-0.1
Adhesive force* N:
105
Weight g:
25
Temperature °C:
280
F32-SCCvT
32 +0.1/-0.1
5,5 +0.1/-0.1
11,5 +1/0
7 +0.1/-0.1
235
40
280
Flachgreifer ø32mm aus SmCo, mit Bohrung und Senkung, verzinkt, bis 280°C
Article number:
F32-SCCvT
D mm:
32 +0.1/-0.1
d mm:
5,5 +0.1/-0.1
d1 mm:
11,5 +1/0
H mm:
7 +0.1/-0.1
Adhesive force* N:
235
Weight g:
40
Temperature °C:
280
F40-SCCvT
40 +0.1/-0.1
5,5 +0.1/-0.1
11,5 +1/0
8 +0.1/-0.1
540
75
280
Flachgreifer ø40mm aus SmCo, mit Bohrung und Senkung, verzinkt, bis 280°C
Article number:
F40-SCCvT
D mm:
40 +0.1/-0.1
d mm:
5,5 +0.1/-0.1
d1 mm:
11,5 +1/0
H mm:
8 +0.1/-0.1
Adhesive force* N:
540
Weight g:
75
Temperature °C:
280
* The forces have been determined at room temperature on a polished plate made of steel (S235JR according to DIN 10 025) with a thickness of 10 mm (1kg~10N). A deviation of up to -10% from the specified value is possible in exceptional cases. In general, the value is exceeded. The type of application (installation situation, temperatures, counter anchors, etc.) sometimes influence the forces enormously. The values given are for orientation purposes. Let our experts advise you.
