BRUGGER Practice

BRUGGERpraxis – Design principles and practical solutions for industry

Here you’ll find ingenious magnet hacks for a wide range of problems.

When people think of magnets, they often picture nothing more than the whiteboard in the office. The reality in engineering and manufacturing, however, is completely different. Modern industrial magnets are underrated powerhouses that solve technical problems precisely where traditional mechanics reach their limits.

They lift loads weighing tonnes with absolute reliability, grip oily workpieces as smart robotic grippers, and transmit driving forces completely contactlessly through solid walls. At the same time, they secure components non-destructively without drilling, dampen machine vibrations, function as wear-free sensors and extract microscopically fine abrasives from complex production lines.
Forget everything you know about conventional connections, couplings or filter systems – discover the true potential of intelligent magnetic technology.

In our BRUGGERpraxis database , we reveal what invisible forces are truly capable of. Discover clever magnetic designs that make processes safer, significantly reduce maintenance costs and overcome challenges previously considered insurmountable. An industrial magnet – or rather , a “MAGNETIC SYSTEM” – is not simply a piece of metal; it is a high-tech tool. We’ll show you how to make intelligent use of physical principles for your industrial application.

How magnetic systems optimise industrial processes

  • Particle separation at the micrometre level (purity): High-performance magnetic filter bars extract the finest metal abrasion and stainless steel dust from flowing bulk materials, ensuring maximum safety in the food and recycling industries.
  • Non-destructive joining (no drilling, no welding): Magnetic systems secure sensors, tools or components to steel via a force-fit – and, if required, can be released and repositioned in seconds without leaving any residue.
  • Contactless power transmission (wear-free): Magnetic couplings and magnetic gearboxes transmit torque through solid walls. The result: 100% leak-tight, no friction, zero maintenance.
  • Fail-safe lifting (no continuous power supply): Switchable permanent magnets lift steel plates and pipes weighing several tonnes. As they maintain their magnetic field independently, the load remains securely suspended even in the event of a total power failure.
  • Secure gripping & automation (unaffected by oil or dirt): Magnetic grippers on the robot arm (end-of-arm tooling) grasp workpieces in milliseconds – even if they are oily, rough or perforated. They are the reliable alternative when vacuum or mechanical grippers fail.

  • Non-contact switching & detection (interference-free): Magnets used as transducers for sensor systems (e.g. Hall or Reed sensors) operate completely wear-free. Unlike optical systems, magnetic fields effortlessly penetrate dirt, oil, steam and even plastic housings.

  • Intelligent damping & tolerance compensation (flexible): Rubber-coated magnet systems do not connect components rigidly, but act as buffers. They effectively absorb machine vibrations and elegantly compensate for mechanical tolerances and clearance dimensions during assembly.

Magnetic solutions for filtering and separating (liquids, bulk materials)

Dometallic contaminants in liquids or bulk materials pose a risk to product safety? Where conventional fleece or screen filters fail or become blocked, our magnetic solutions come into play: high-performance magnetic filters and magnetic separators reliably remove even the finest (para-)magnetic particles from liquids and granulates – without any loss of pressure. As your development partner based in the Black Forest, BRUGGER GmbH designs bespoke, low-maintenance separation solutions ‘Made in Germany’ for the mechanical engineering sector, metalworking companies and the pharmaceutical and food industries throughout the DACH region.

Is ultra-fine abrasive wear in cooling lubricants damaging your pumps?
During grinding and honing processes, conventional paper tape or fleece filters fail because micro-fine metal dust (less than 10 μm) simply slips through. The result is damaged high-pressure pumps and high costs for filter media. The solution from BRUGGER GmbH: wear-free magnetic filters in bypass or full-flow configurations. Powerful neodymium magnetic systems reliably capture the ultra-fine carbide abrasion before it reaches the pump. Unlike barrier filters, a magnetic system causes no pressure loss.
Depending on the objective, magnetic filters are integrated into either the bypass or full-flow system. For the best possible fluid maintenance, bypass operation (by-pass) is recommended, as the parameters can be ideally adapted to the filter in this configuration. In full-flow operation, the focus is less on achieving perfect fluid purity and more on direct system protection, for example for high-pressure pumps

Suitable designs for cutting fluid systems:
1. Inline magnetic rod housings (full-flow or bypass) For the finest metal sludge in fluids, housings are used which contain several high-intensity neodymium magnetic rods (with up to 12,000 gauss). To clean the system, the magnetic cores are manually pulled upwards out of their stainless steel protective sleeves. The magnetic force on the pipe is released and the sludge simply falls into a collection container.

2. Magnetic grids or magnetic screens
These tightly welded stainless steel magnetic rods (assembled into grids or rakes) are placed flat directly into the clean tank or suspended vertically in front of the high-pressure pump’s suction inlet. Advantage: A very cost-effective and extremely simple retrofit.

Economic benefit:
Ongoing expenditure on consumables such as filter fleece or paper strips is completely eliminated, whilst the service life of the cooling lubricant increases significantly. At the same time, expensive high-pressure pumps are reliably protected against wear, which minimises unplanned repair costs and plant downtime.

© Brugger GmbH

When it comes to protecting downpipes and filling lines in the food, pharmaceutical or plastics industries, static magnetic screens are often a bottleneck. With free-flowing, cohesive or hygroscopic bulk materials, the particles tend to become wedged. If the powder cannot pass the magnet, the magnet must move towards the powder. The solution to product blockages is a rotating magnetic separator.
The tightly welded stainless steel magnetic bars are mounted in a circular arrangement on a shaft and rotate continuously inside the housing. The rotational movement keeps the powder mechanically in motion – product bridges cannot physically form in the first place, and the turbulence ensures that every single particle inevitably comes into contact with the magnetic surface. High-intensity neodymium cores (up to 12,000 Gauss) reliably extract even the finest stainless steel abrasion (e.g. from screen breakage) from the flowing product stream. You can purchase the “raw magnetic rods” – with or without threads – in various sizes for your design from us, or discuss your idea with our developers and design engineers – we’ll be happy to implement your bespoke solution for your plant.
To eliminate material build-up, adhesion or bridging in containers, the bulk materials and recycling industries frequently rely on compressed-air knockers. Thanks to powerful magnet-vacuum systems, such as our vakuLINE systems, innovative, mobile solutions can be fitted to any container wall in no time at all and completely non-destructively – without any welding or drilling work.

Economic benefit:
Production downtime caused by blocked downpipes or manual clearing is a thing of the past. The plant operates at a constant throughput, whilst automated separation reduces both labour costs and the risk of screen breakages in subsequent process stages.

Magnetic filter bar made of NdFeB ⌀25mm with internal thread on both sides | © Brugger GmbH

Do you think stainless steel can’t be filtered using a magnetic filter?
Those working in machining or plant engineering often use expensive fleece or mesh filters for stainless steel. The reason: stainless steel such as 1.4301 (V2A) is considered non-magnetic. However, this is a misconception that leads to massive filtration costs and unwanted pressure loss in the pipes within the industry.

As soon as stainless steel is machined (milling, grinding, honing), cold deformation causes the formation of what is known as martensite. The microstructure changes and the microscopic fine abrasion particles become weakly magnetic (paramagnetic). The solution from BRUGGER GmbH: To separate these weakly magnetic particles even from viscous machining oils (with high viscosity), we design special high-gradient magnetic systems. Thanks to an extremely high flux density of > 10,000 gauss at the tube surface, the stainless steel abrasion particles are extracted from the fluid – without wear, without ongoing costs for filter media, and at a constantly maintained line pressure.

Suitable designs for media that are difficult to filter and paramagnetic abrasion:

1. High-performance magnetic filter bars (> 10,000 Gauss) with an extraction sleeve
For weakly magnetic abrasives, extremely densely packed neodymium systems are used, which protrude directly into the liquid flow. The highly concentrated magnetic field effortlessly overcomes the resistance of viscous oils. Thanks to the double-tube system (extraction sleeve), the rods can be cleaned in a single step whilst the system is running: simply pull out the magnetic core, and the stainless steel sludge falls off the sleeve, which has become non-magnetic.

2. Bypass magnetic filter systems for highly viscous oils
Instead of forcing the entire fluid flow through a filter at high pressure (full-flow), installation in a bypass (partial-flow) is recommended for paramagnetic abrasives. Here, the flow rate (l/min) can be regulated so that the weakly magnetic particles have sufficient time to migrate safely through the dense oil to the magnetic surface and adhere there.

Economic benefit:
Even with media that are difficult to filter, you can operate entirely without expensive disposable filter media and without energy-intensive pressure loss in the pipes. As the rods can be cleaned via the extraction sleeve whilst the system is running, there is absolutely no downtime during maintenance.

In the food, animal feed, pharmaceutical and recycling industries, the focus is not only on protecting plant equipment (e.g. mills and extruders from broken screws), but above all on ensuring absolute product purity. If foreign objects find their way into baby food or pharmaceutical powders, this can lead to costly product recalls. Furthermore, there is often a high risk of dust explosions in powder processing plants.

BRUGGER GmbH’s solution: product safety and audit compliance are our top priorities when designing our separation systems. As a German manufacturer, we build magnetic filters that have no hygienic weak points. We use dead-space-free polished stainless steel welded seams and FDA-compliant seals in accordance with EHEDG guidelines. For environments at risk of dust explosions in powder and bulk material processing, we also supply fully ATEX-certified housings. This ensures 100% purity and plant protection ‘Made in Germany’.

Economic benefit:
You minimise the risk of business-threatening product recalls and costly damage to your reputation to an absolute minimum. At the same time, your production lines will pass demanding customer and regulatory audits without the need for costly retrofits.

Magnetic filter tubes | © Brugger GmbH

The most effective and low-maintenance solution is the use of neodymium magnetic filters directly within the material flow. In production processes (e.g. when processing plastic granules, wood shavings or recycled material), minute ferromagnetic foreign particles, fine iron dust or mechanical abrasion often find their way in unnoticed.

The problem is that if these metal particles enter extruders, injection moulding nozzles or grinding units, they can cause serious damage to machinery, lead to costly production downtime and result in high levels of scrap. Conventional screens become clogged quickly and increase the pressure in the pipes. Industrial magnetic filter systems capture these particles during continuous operation without any barriers and in a way that is gentle on the material.

Smart magnetic tips for filtration:

  • 1. Funnel-shaped magnetic filter grids (protection for granules & powders): These magnetic filter grids (e.g. in a 60° funnel shape) are inserted directly into the material hoppers of processing machines. They force the free-flowing material to pass closely past the highly magnetic rods.
    • Practical application: Ideal protection in plastic injection moulding machines or recycling hoppers, to capture even the finest, weakly magnetic abrasive particles.
  • 2. Magnetic filter bars in pipework (liquids & emulsions): Individual, extremely strong neodymium magnetic bars are integrated into closed pipes and process lines. The smooth stainless steel casing ensures that the flow is not impeded. External pipe filters, which are fitted around the pipe like a sleeve, are an equally common filtering system.
    • Practical application: Separation of iron particles from liquid media, coolants or food streams.

  • 3. Magnetic wheels for conveyor belts (automatic continuous separation): Here, the conveyor belt’s deflection roller itself acts as a magnet. Whilst the clean material falls off the belt as normal, metallic foreign objects are held by the magnet and are only automatically discharged at the underside of the belt.
    • Practical application: Continuous, automated separation in recycling and timber processing plants without any manual cleaning required.

Brugger’s practical tip for maintenance:
Our filter systems are modular and bolted together. This means that the entire system does not need to be dismantled for cleaning. The magnetic rods can be easily removed and the stripped-off metal particles fall away effortlessly – reducing maintenance time to a minimum.

Economic benefit:
Serious damage to expensive extruder screws, injection moulding nozzles or grinding units is reliably prevented. This drastically reduces scrap rates and spare part costs whilst ensuring high, uninterrupted system availability.

Magnetic solutions for fastening and mounting (without drilling or welding)

A lack of space, rigid mountings or a strict ban on drilling into machinery and steel beams?
In modern manufacturing, every minute of set-up time costs money, and any damage to painted housings jeopardises corrosion protection. Where traditional screw and welded joints are too inflexible or compromise structural integrity, our magnetic solutions come into play: Wear-free magnetic systems secure sensors, cable harnesses, tools or operator tablets (HMIs) rock-solid – and can be infinitely adjusted or removed without leaving any residue in a matter of seconds if required.
As your development partner from the Black Forest, BRUGGER GmbH designs magnetic, bespoke holders and fastening solutions for mechanical engineering, automation technology and plant engineering that can withstand even the strongest shear forces.

Magnetic attachment of light to machine | © Brugger GmbH
Magnetic scanner attachment | © Brugger GmbH

Yes, this can be done easily and highly efficiently. By using specialised industrial magnet systems, tools, HMIs and measuring equipment can be attached to machine housings or control cabinets in a way that is extremely gentle on the materials. The 5S method (Lean Management) requires tools to be within easy reach exactly where they are needed. However, drilling into or welding machine sheet metal is strictly forbidden in workshop practice, as it voids the manufacturer’s warranty, compromises protection ratings (e.g. IP65) and can damage the underlying electronics. Magnetic holders resolve this conflict without causing any damage: they eliminate long walking distances and keep tools flexibly within the operator’s immediate reach.

Suitable designs for workshop use:

  • 1. Flat pot magnets with threads: These neodymium systems concentrate their holding force precisely on the contact surface. Standard parts, hooks or pipe clamps can be screwed directly onto the integrated metric thread.
    • Practical application: Flexible mounting of pneumatic guns, hand-held scanners or heavy torque wrenches.

  • 2. Fully rubber-coated magnetic systems: The robust rubber coating provides 100% protection against scratches for powder-coated housings and increases resistance to slippage on smooth surfaces. The rubber also acts as an effective vibration damper.
    • Practical application: Secure mounting of industrial tablets (HMIs), monitors and sensitive electronics on vibrating machinery.

  • 3. Magnetic articulated arms and goosenecks: The combination of a strong magnetic base and a mechanical articulated arm allows for fully flexible, rotatable and tiltable positioning with just one hand movement.
    • Practical application: Ergonomic positioning of digital callipers, dial gauges or process cameras within the operator’s field of view.


  • 4. Magnetic storage trays and boxes: Compact storage units fitted with magnets that adhere flat to any steel surface.
    • Practical application: Provision of indexable inserts, Allen keys, test reports, operating instructions or cleaning wipes directly at the machine.

Economic benefit:
The manufacturer’s warranty and protection ratings (e.g. IP65) of expensive machines remain fully valid, as no mechanical intervention in the housing is required. At the same time, ergonomically positioned tools and HMIs significantly reduce the time employees spend searching for and walking to items – which boosts productivity directly at the workstation.

One of the most effective measures is the systematic switch to tool-free assembly systems. If production lines are idle for too long during product changeovers, this ties up valuable capacity. In line with the SMED method (Single-Minute Exchange of Die), bespoke magnetic systems offer a highly efficient and cost-effective solution to drastically reduce costly downtime. As a smart alternative to complex, mechanical zero-point clamping systems, magnetic ‘snap-in’ principles and flexible peripheral mountings can be implemented.
Instead of laboriously screwing components together, they are fixed precisely and non-destructively using magnetic force. This eliminates time-consuming screw-fastening work and reduces set-up times from many minutes to just a few seconds.

Efficient practical solutions:

  • 1. Magnetic snap-in principle (tool & fixture change): Stops, gripper jaws or devices are fitted with precisely milled flat pot magnets or switchable magnets. The component ‘snaps’ into the exact position automatically.
    • Practical application: Quick replacement of format parts or tools in a single step – completely play-free and resistant to extreme vibrations and oily surfaces.

  • 2. Non-destructive mounting of sensors and peripherals: When changing products, cameras, photoelectric sensors or vibration sensors often need to be repositioned. As drilling into machine tables or robot arms is not an option and adhesive bonding fails under vibration, rubber-coated magnetic systems provide the ideal hold.
    • Practical application: Re-positioning of sensor and monitoring technology in a matter of seconds, leaving no marks and without the need for tools.

  • Temporary barriers during maintenance and set-up: During set-up or maintenance work, hazardous areas must be temporarily cordoned off for other staff. Erecting rigid barriers takes up valuable time in day-to-day operations.
    • Practical application: Use of housings with retractable barrier tapes, which are secured to adjacent machine panels in a flash via a switchable magnet to immediately establish a safety zone.

Economic benefit:
Set-up time is reduced from time-consuming precision work to a few simple steps. Machine availability increases immediately, whilst health and safety is enhanced and the sensitive plant structure remains 100 per cent protected and undamaged.

Magnetic mounting solution for cables | © Brugger GmbH
Magnetic socket strip attachment | © Brugger GmbH

Cables and electrical components can be retrofitted without tools and without damaging the equipment by using the machine housing as a magnetic mounting surface. When expanding systems, it is often necessary to fit new pneumatic hoses, thick cable harnesses or additional socket strips . Drilling into or welding the sheet metal cladding is strictly prohibited, as it damages the corrosion protection (paintwork), invalidates the machine’s warranty and puts the underlying electronics at risk.
Conventional adhesive pads quickly fail in industrial environments, as they lose their adhesive strength or harden due to machine oil and temperature fluctuations. Heavy-duty industrial magnetic systems solve this problem: they secure cables permanently and safely whilst remaining fully flexible. Specially rubberised magnetic systems also increase the shear force.

Suitable designs for cable and electrical installations:

  • 1. Magnetic systems with cable tie holders: Rubberised systems with a pre-fitted standard base for standard cable ties. They hold hoses and cable harnesses securely to vertical or overhanging sheet metal and dampen vibrations.
    • Practical application: Neat bundling and routing of temporary or permanent supply cables directly along the machine housing.
  • 2. Specialised hooks and eyelet magnets for cable harnesses: Extra-strong, rubberised magnetic systems specifically designed to support heavy loads. They permanently secure thick bundles and entire harnesses in place using robust industrial cable ties, either through the eyelet or directly onto the hook.
    • Practical application: Safely raising supply cables out of workers’ walkways to eliminate dangerous trip hazards and protect cables from metal shavings or forklift trucks.
  • 3. Pot magnets with threaded studs for pipe clamps & sockets: Neodymium systems with enormous holding force and a standardised threaded stud (e.g. M6 or M8). Standard pipe clamps, C-clamps or mounting plates can be securely screwed onto these.
    • Practical application: Lightning-fast retrofitting of rigid compressed air lines, heavy multi-socket outlets or entire distribution boxes on the control cabinet.
  • 4. Magnet-fitted cable ducts: Standard cable ducts made of plastic or sheet metal, fitted with precisely matched magnet systems screwed onto the rear.
    • Practical application: Neat, completely concealed and protected cable routing over longer distances – ideal for the rapid installation and reconfiguration of entire cable runs without the need for tools.

Economic benefit:
Installation and expansion times are drastically reduced. As the corrosion protection of the housings remains 100 per cent intact, rust formation is effectively prevented and the resale value of the expensive production equipment is fully preserved.

Magnetic solutions for contactless power transmission (wear-free drive and coupling)

Are leaky shaft seals, broken slip clutches or mechanical wear in the cleanroom causing high maintenance costs in your plant?
Where conventional gear wheels and mechanical seals reach their physical limits, magnetic drive systems demonstrate their full potential. By using high-intensity magnetic couplings and magnetic rotors, we transmit torque completely contact-free – even through solid, closed walls.

This principle not only enables 100% hermetically sealed pumps and agitators without any leakage, but also acts as an integrated, wear-free overload protection for expensive motors and gearboxes. As your development partner, BRUGGER GmbH designs bespoke magnetic face couplings and magnetic gearboxes that require no lubrication, produce no particle abrasion and can withstand even extreme speeds or temperatures.

Face swivel coupling open small | © Brugger GmbH
Face swivel clutch closed small | © Brugger GmbH

In the chemical, pharmaceutical and food industries, leaking mechanical seals on pumps or agitators pose a major risk. They lead to contamination, product loss or the release of toxic gases. The problem is that wherever a mechanical drive shaft has to pass through a housing, wear and sealing problems are inevitable. The solution to this problem is to dispense with a through-shaft entirely. By using magnetic couplings (rotary magnetic couplings), we completely separate the drive and output mechanically from one another.

Suitable solutions for hermetic sealing:

  1. Magnetic face couplings with a gap sleeve: The outer magnetic rotor (drive) and the inner magnetic rotor (driven) face each other. Between them is a completely sealed, non-magnetic gap sleeve (made of stainless steel, Hastelloy or plastic). The torque is transmitted invisibly and contactlessly through the sealed wall by means of the magnetic field.
    Practical application: Used in hermetically sealed magnetic drive pumps for corrosive acids, hot thermal oils or sterile bioreactors.

  2. Coaxial magnetic couplings (internal/external rotor): Here, an outer magnetic ring rotates around an inner magnetic ring. This design is extremely space-saving and can transmit very high torques.
    Practical application: Driving agitators in high-pressure autoclaves or vacuum chambers, where pressure fluctuations caused by leaky shafts must not occur.

Economic advantage:
As there is no longer a mechanical seal, mechanical wear is completely eliminated. The system is 100 per cent maintenance-free; leaks are physically impossible, and costly downtime due to seal replacement is a thing of the past.

Small central rotary clutch | © Brugger GmbH

If an agitator becomes blocked (e.g. by clumped material) or a pump encounters a solid particle, this can lead, in a fraction of a second, to broken shafts, burnt-out motors or damaged gearboxes. Conventional mechanical slip clutches or shear pins wear out every time they are triggered and are costly to replace. Magnetic couplings offer integrated, wear-free overload protection in such situations.

Efficient solutions for drive protection:

  1. Integrated magnetic slip function: The magnetic rotors are designed to transmit exactly the required rated torque. If this torque is exceeded (e.g. due to a blockage in the agitator), the magnetic field breaks down in a controlled manner. The drive and output ‘slip’ past each other without contact (slip). Practical application: Protection of expensive electric motors and gearboxes in mixing plants, extruders or on conveyor belts that are prone to jamming.

  2. Automatic re-engagement (synchronisation): Unlike mechanical shear pins, which must be physically replaced after tripping, magnetic couplings immediately re-engage automatically once the blockage has been cleared (or the speed reduced).
    Practical application: Automated processes where machine operators cannot intervene immediately, or where set-up times must be avoided due to repairs to the drive train.

Economic benefit:
There is no need whatsoever to replace wear parts in the event of an overload. The system protects itself automatically, motor damage is reliably prevented, and production can resume immediately once the blockage has been cleared, without the need for maintenance work.

In cleanrooms, under vacuum, at extreme temperatures or in food processing, the use of lubricants (oil, grease) on gear wheels is often strictly prohibited. Nevertheless, rollers or rotors must be driven with precision. Although mechanical plastic gear wheels can run dry, they wear out quickly and generate abrasion (particles). The solution is to use magnetic drives or contactless magnetic rotors.

Suitable designs for lubricant-free drives:

  1. Magnetic spur gears (contactless gearing): Instead of physical teeth, these rotors mesh contactlessly via alternating north and south poles. The drive torque is transmitted across the air gap.
    Practical applications: Driving transport rollers in semiconductor manufacturing (cleanroom), in coating systems (vacuum) or in ovens in the food industry (where grease is not permitted).

  2. Angular gearboxes with magnetic rotors (90° power transmission): Thanks to the special arrangement of neodymium magnets on bevelled surfaces (similar to a bevel gear), the direction of the force can be redirected by 90 degrees without physical contact.
    Practical application: Redirection of drive forces in very compact housings or in sterile filling systems, where mechanical gear wheels would contaminate the product.

Economic benefit:
The system requires no lubricant whatsoever, generates absolutely no particle abrasion and is completely maintenance-free. It is ideally suited to environments with the highest purity or hygiene requirements (FDA compliance).
No damage in the event of overload: If the load torque exceeds the maximum magnetic holding force, the magnetic poles simply slip past each other. The gearbox suffers no mechanical damage and automatically re-engages as the load decreases.

A common concern amongst designers is that magnets lose their strength at high temperatures or are destroyed by centrifugal forces at high speeds. However, with the correct design, this is not a problem. Standard neodymium magnets lose performance from around 80 °C, but by selecting special magnetic materials and high-strength laminations, magnetic couplings are also suitable for extreme industrial applications or the medical sector (MRI).

Solutions for extreme operating conditions:

  1. Use of high-temperature-resistant magnetic materials (SmCo): Whilst neodymium-iron-boron (NdFeB) magnets can be designed for standard applications up to approximately 150 °C (depending on the alloy), we use samarium-cobalt (SmCo) magnets for high-temperature applications. These can withstand temperatures of up to 350 °C on a continuous basis.
    Practical applications: Contactless drive of hot oil pumps, thermal systems, industrial furnaces or chemical reactors in the high-temperature range.

  2. Rotors with protective casing: To protect the magnets from centrifugal force at very high speeds (up to 30,000 rpm), the rotors are not only bonded but also encased in high-strength bandages (material selection depends on the application).
    Practical applications: Driving high-speed centrifuges, turbo compressors or vacuum pumps.

  3. Stator shells for minimising Eddy current losses: In metallic stator shells, heat-generating Eddy currents occur at high speeds. Special stator shells made from high-performance plastics (e.g. PEEK) or industrial ceramics reduce these losses to zero and keep the system cool.
    Practical application: Increased efficiency and prevention of heat build-up in magnetically coupled continuous-duty pumps.

Economic benefit:
Thanks to custom-tuned magnetic alloys and rotor designs, you benefit from a drive system that operates with absolute reliability, is wear-free and requires minimal maintenance, even under the most adverse conditions (heat, centrifugal force).

Magnetic solutions for switching, securing and lifting (non-electric and fail-safe)

Anyone who needs to secure heavy steel components, clamp workpieces in a CNC machine or grip sheet metal using a robotic arm requires enormous holding forces that can be flexibly activated and deactivated in a fraction of a second. Electromagnets often pose a safety risk in this context: if the power fails, the load falls. Furthermore, they consume energy continuously.

BRUGGER GmbH’s solution is based on the intelligent technology of switchable permanent magnets and electro-permanent magnets. These systems generate their extreme magnetic field entirely independently and consume a current pulse (if at all) only for the brief moment of switching. Discover how our switchable magnet solutions ensure maximum reliability and replace mechanical clamping systems in robotics, machining, welding plant construction and the precast concrete industry.

When lifting heavy steel plates, pipes or blocks by crane, safety is the top priority. Pure electromagnets (which are connected to the mains supply) pose a serious risk that the load will fall uncontrollably in the event of a power cut or a cable break. Furthermore, heavy power cables severely restrict freedom of movement in the production hall. Switchable load-lifting magnets based on permanent magnets offer a self-contained and safe alternative.

Efficient solutions for load handling:

  1. Manually switchable load-lifting magnets: Extremely strong neodymium permanent magnets operate inside the solid steel housing. By manually flipping a robust lever on the housing, the magnetic lines of force are redirected internally so that the magnetic field is concentrated and directed outwards into the workpiece. The system grips firmly into the steel and holds the load purely by physical means – without a battery, rechargeable battery or any external power supply.
    Practical application: Safe and completely self-sufficient lifting, swivelling and positioning of heavy steel beams, sheet metal or round bars in metal construction, toolmaking or in materials stores.

Economic benefit:
The system is 100 per cent fail-safe, as no sudden loss of power is possible – this reduces the risk of accidents. As no obstructive power cables are required, you can operate the crane with maximum flexibility. Furthermore, compared to electric systems, there are no ongoing energy costs and the need for time-consuming maintenance of cables and contacts is completely eliminated.

In milling, drilling and grinding machines, securing workpieces is a time-consuming process. When metal parts are clamped using conventional machine vices or mechanical clamping jaws, they often have to be re-clamped at considerable effort during machining because the tool (e.g. the milling head) needs to reach the edges.

Magnetic clamping technology for machining:

  1. Switchable permanent magnet clamping plates: The metal block is placed flat on the magnetic clamping plate. A mechanical switch lever is used to move the internal magnetic cores so that the magnetic field is activated. This draws the workpiece firmly and evenly across its entire surface against the machine table.
    Practical application: Five-axis milling or surface grinding in tool and mould making.

Economic benefit:
The workpiece remains fully accessible from five sides. Time-consuming re-clamping is completely eliminated, set-up times are drastically reduced, and the full-surface clamping dampens machining vibrations, which significantly improves the surface finish of the workpiece.

On automated assembly lines, robotic arms must pick up, move and precisely place sheet metal, castings or perforated sheets. Vacuum grippers often reach their limits here when surfaces are rough, oily or perforated (suction cups draw in ambient air).

Possible solutions for magnetic robot grippers:

  1. Pneumatically actuated permanent magnet grippers: A permanent magnet integrated into the housing is physically moved within the housing by a short pneumatic stroke. When the magnet moves downwards to the contact surface, the magnetic field grips the workpiece. When the cylinder moves the magnet back upwards, shielding occurs and the workpiece drops immediately.
    Practical applications: Pick-and-place applications in the automotive industry, the removal of hot or oily sheet metal from presses, or the secure holding of components on sorting lines.

Economic benefit:
Magnetic grippers grasp ferromagnetic parts in milliseconds – completely unaffected by oil, dust or holes in the workpiece. They hold the load purely magnetically and require compressed air only for the brief moment of switching.

In precast concrete production, wall and floor elements are cast on large steel tables. If the formwork is welded or drilled onto these expensive tables, the surface is irreparably damaged.

Solutions for the construction and concrete industries:

  1. Formwork magnets (magnetic boxes): Highly robust steel housings with an extremely powerful neodymium magnetic system (often with a holding force of over 1,000 kg). The magnetic field is mechanically activated by stepping on or pressing the top button, pressing the formwork onto the steel table. To release it, the button is pulled back up using a lever tool.
    Practical application: Securing timber or steel formwork in a matter of seconds during the production of precast slabs or walls.

  2. Integrated magnetic bars for U-profiles: Switchable permanent magnet systems are integrated directly into the steel formwork (U-profiles) to avoid the need for separate magnet boxes.
    Practical application: Use in highly automated continuous production lines.

Economic benefit:
The expensive steel tables remain 100 per cent undamaged. Formwork installation and removal at the touch of a button is drastically accelerated, which significantly reduces cycle times in precast concrete production.


In the workshop, whilst welding or during quality control, tools often need to be secured temporarily but extremely firmly. Screwing them in place is not an option, and permanent magnets attract unwanted metal shavings that are difficult to remove.

Smart magnetic hacks for the workshop and laboratory:

  1. Switchable magnetic brackets & earthing clamps: These powerful permanent magnets hold steel plates at exactly the desired angle (e.g. 90° or 45°) during welding. Once the weld has been made, the magnetic field is simply deactivated via a mechanical rotary switch.
    Practical application: Tacking and welding in steel and jig construction. The key feature: Thanks to the mechanical deactivation, magnetised metal shavings fall off immediately – the tool is clean again in seconds.

  2. Magnetic stands with switching function: A compact magnetic base with a rotary lever serves as the base for articulated arms. The lever internally diverts the magnetic flux (short-circuit).
    Practical application: Stable, vibration-free mounting of precision dial gauges on machine tables. When the magnet is deactivated via the lever, the stand can be moved with no effort at all.

Economic benefit:
You create flexible ‘third hands’ that reduce set-up and alignment times and guarantee fast, precise positioning of tools – without the need for electricity.

Non-contact sensors & signal transmitters (interference-free switching)

In harsh industrial environments, optical photoelectric sensors or mechanical limit switches quickly reach their limits. Dirt, oil mist, hot steam or severe vibrations inevitably lead to false signals, wear and tear, and costly plant downtime. The most reliable alternative for modern automation is non-contact detection using permanent magnets as signal transmitters.

When combined with Hall sensors or reed contacts, they enable completely wear-free switching, measurement and positioning. The ingenious thing about magnetic technology is that invisible magnetic fields penetrate dirt, liquids and even non-magnetic walls – such as stainless steel or plastic housings – with complete ease. As your development partner, BRUGGER GmbH supplies precisely calibrated raw magnets and injection-moulded, plastic-bonded magnet systems that are precisely tailored to your sensor technology – for interference-free and longevity in signal transmission.