Raw magnets of hard ferrite

Ring magnet of hard ferrite

technical drawing Ring magnet | © Brugger GmbH
technical drawing Ring magnet | © Brugger GmbH
technical drawing Ring magnet | © Brugger GmbH

PRODUCT INFORMATION:
For the production of HF magnets, tools are often required. Therefore, not every desired dimension can be realised. Simple forms and small quantities can be cut from blocks or bars. The surface is blank but not free of dust. The specified temperature refers to the maximum operating temperature of the material. The resistance may be reduced due to the geometry.

As an alternative to the standard we also offer individual solutions:
» customised dimensions
» modified directions of magnetisation
» other types of magnetisation
» further qualities

Data sheet
Product variants
Article numberQualityD mmd mmH mmAdhesive force* NWeight gTemperature °CMagnetisationReduction
MFARm20x10x4.326/2219.8 +0.2/-0.210 +0.2/-0.24,3 +0.1/-0.154.9250axial
RM020HFRi99rh1726/2220 +0.1/-0.16,5 +0.2/-0.25 +0.1/-0.15.56.7250axial
RM026HFRi99rh0326/2226 +0.4/-0.415 +0.3/-0.33,8 +0.1/-0.16.56.5250axial
RM032HFRi99rh0026/2232 +0.2/-0.212,2 +1/08 +0.2/-0.215.526250axial
RM035HFRi99rh0026/2235.5 +0.7/-0.76,5 +0.3/-0.39,5 +0.1/-0.12044250axial
MFARm36x18x828/2436 +0.3/-0.318 +0.5/-0.58 +0.1/-0.11722250axialno
MFARm40x19x7.526/2240 +0.8/-0.819 +0.4/-0.47,5 +0.1/-0.12636250axial
MFARm45x22x8.526/2245 0/-0.822 +0.4/-0.48,5 +0.1/-0.12851250axial
MFARm51x24x926/2251 +1.1/-1.124 +0.5/-0.59 +0.1/-0.13072250axial
RM056HFRi99rh0326/2255 +1.1/-1.124 +0.5/-0.58 +0.1/-0.13074250axial
MFARm56x24x1226/2255 +1.1/-1.124 +0.5/-0.512 +0.1/-0.135125250axial
MFARm70x15x1526/2269.8 +1/-114,8 +0.4/-0.415 +0.1/-0.175265250axial
MFARm72x32x824/2372 +0.2/-0.232 +0.5/-0.58 +0.1/-0.132126250axial
MFARm72x32x1526/2272 +1.2/-1.232 +0.5/-0.515 +0.1/-0.153235250axial
MFARm86x34x1826/2286 +1.2/-1.234 +0.5/-0.518 +0.1/-0.1106410250axial
RM102HFRi99rh0126/22102 +0.2/-0.251 +1/-120 +0.1/-0.1145588250axial
Magnetized via the height (H)
* The forces have been determined at room temperature on a polished plate made of steel (S235JR according to DIN 10 025) with a thickness of 10 mm (1kg~10N). A deviation of up to -10% from the specified value is possible in exceptional cases. In general, the value is exceeded. The type of application (installation situation, temperatures, counter anchors, etc.) sometimes influence the forces enormously. The values given are for orientation purposes. Let our experts advise you.